REV A · Digital DIY build pack

Build BirdBoy.

Slot in NFC cards or cartridges to launch games from your own R36S library.

DIY build pack · basic soldering · parts ≈ €70–90

€14.99Digital build pack+ local VAT at checkout
REV A · 15 SECOND DEMO
01INSERT · DETECT · PLAY

Reddit posts with 120k+ views in r/SBCGaming and r/R36S

/ REV A

A new back. A familiar feel.

Shoulder buttons.
Back in play.

The new retrofit mounts as a module on the backplate, bringing shoulder-button support back to BirdBoy.

Rear view of the R36S with the REV A NFC-card module, offset mount and four exposed shoulder buttons
REV A · Mounted to the backplate.

Modular mounting

Mounted to the backplate.

An offset mount keeps the module clear of the shoulder buttons.

Side view showing the space between the NFC-card module and the shoulder buttons
The REV A module and offset mount on the R36S.

/ TWO FORMATS

Choose your ritual

Card or
cartridge?

Two ways to give your game library a physical form. Both designs are included in the REV A build pack.

Side profile of the NFC-card case mounted on an R36S
NFC Card · 16 mm case.
01 / NFC CARD

A card for every game.

A slim NFC card with the same physical insert-to-play experience. 16 mm case thickness, excluding the R36S.

Side profile of the cartridge case mounted on an R36S
Cartridge · 18 mm case.
02 / 3D-PRINTED CARTRIDGE

Make it a cartridge.

A printed cartridge gives the NFC tag a shell of its own. 18 mm case thickness, excluding the R36S.

NFC-card and printed-cartridge modules side by side with their media inserted
Two formats. The same physical ritual.

See the whole profile

A closer look at the fit.

Both formats mount to the backplate. The offset gives your fingers more room at the shoulder buttons; the REV A module extends above the handheld.

Case thickness: 16 mm for NFC Card, 18 mm for Cartridge. These measurements exclude the handheld.

/ 01

The simple version

Pick it up.
Drop it in. Play.

01

Pick a cartridge

Every physical cartridge represents one game in your local library.

03

The game launches

No searching and no menu diving. Remove it when you are done.

WHAT IS ACTUALLY INSIDE?

The honest answer

Not a ROM.
A tiny key.

The game stays on the handheld. The NFC tag tells BirdBoy which title to launch—giving a digital library a physical ritual again.

Starting with makers

Build this.
Help fund
what’s next.

BirdBoy starts as a DIY project. A finished hardware product would need funding for testing, compliance and manufacturing.

Purchases of the digital build pack help fund future updates and further development.

Future revisions and a finished hardware product are not guaranteed.

01REV A

Build files and illustrated guide are ready.

02Future updates

Further development depends on testing and demand.

Early supporter edition

Your own
BirdBoy.
Built by you.

One digital pack for the REV A retrofit, with both build variants and the instructions to put it together.

REV A custom green PCB with the red NFC reader and antenna module attached
Inside REV A · Custom PCB with NFC reader module.

REV A DIY BUILD PACK

Build pack available.

€14.99 + local VAT at checkout

One-time purchase.

Before you buy: difficulty, tools, compatibility
Tools
Soldering iron (basic soldering); 3D printer or print service for the cartridge variant
Parts cost
≈ €70–90
Not included
Physical hardware, ROMs

Digital files only. No R36S, components or ROMs included. See estimated build cost ↗

Digital delivery

After payment, open the guide and files in your buyer account.

Get the build pack ↗

REV A / Inside the pack

What’s in the pack?

PCB placeholder preview
01 / PCB

PCB files

Manufacturing files and bill of materials.

Card and cartridge placeholder preview
02 / 3D

Print files

For the 16 mm card and 18 mm cartridge.

Build guide screenshot placeholder
03 / GUIDE

Build guide

Step by step, in English and German.

Software screenshot placeholder
04 / SOFTWARE

Software

Installation and setup on ArkOS.

Preview images: Tim will replace these with final file screenshots.

Before you build

A few things
to know.

Am I buying a finished BirdBoy?

No. This is a digital DIY pack. You order the parts, print the enclosure and assemble the retrofit yourself. No handheld or physical hardware is supplied.

What will I need to build it?

A compatible R36S, the required electronic components, access to 3D printing and the tools listed in the guide. Plain parts list without affiliate links.

Are future updates included?

Future digital updates to this retrofit project are included if released. No future revision or release date is promised.

What does my purchase help fund?

Further development, prototype boards and testing. The REV A files and guide are ready.

Are games included?

No. NFC tags identify games in your existing local library. The pack does not include games or ROMs.

Does it work with Zaparoo?

It runs on BirdBoy’s own software. Zaparoo compatibility is being looked into.

Which R36S versions and clones work?

[TBD]

Can I build it without a 3D printer?

Yes, with the 16 mm NFC card variant or a print service.

Are ROMs included?

No. Each tag is only a key to a game in your own library.

Why no finished hardware?

EU certification (CE) costs are too high for a small project, so it’s DIY only.

Prices and VAT

€9.99 net intro price until November 8, 2026, then €14.99. VAT is added at checkout depending on your country.

REV A digital build pack

Ready to build
your BirdBoy?

Both build variants, software and illustrated instructions in one digital pack.

Get the build pack · €14.99 ↗

Digital delivery to your buyer account after payment.

€14.99 · Get the build pack ↗